Product Encyclopedia
Encyclopedia
Sample
Auto plastic mold & part Service
Auto plastic mold & part Service
Auto plastic mold & part Service
Release time:2021.09.11
Publisher:Qingdao Metal Design International Trading Co.,ltd
1、 During welding operation, welding slag and arc are not allowed to damage other non welding parts of parts, especially visible parts. The welding slag after welding shall be cleaned, including cleaning various particles adhered to the surface of parts by solder spatter.
2、 There shall be visible bulges and depressions during the welding of large structural parts.
3、 The welding shall be firm and reliable, and the solder on the outer surface of parts shall be in place and filled without gap.
4、 The welds shall be neat and uniform without cracks, undercuts, notches, burn through and other defects. There shall be no slag inclusion, air hole, weld bead, pit and other defects on the outer surface and no obvious on the inner surface.
Contact
Company:Qingdao Metal Design International Trading Co.,ltd
Mail:cre@crecompany.com
Address: Shenzhen Road,Qingdao City,Shandong Province,China.
Mob:0086-188 6390 7726
Fax:0086-532-8891 8275
Website:www.dmfgchina.com
Leave us a message.
HOTLINE / 0086
188 6390 7726